624.015.033 624.000.031 100 624.115.030 624.100.035 min max 8 17 49 69 64,50 35 17 Ø25 Ø25 61,50 32 17 Ø25 Ø25 TRASER-6: Knock-in fitting Knock-in fittng > Maximum problem-free adjustment and precision. A Ø18mm hole provides access to all adjustments. Our adjustment screws never penetrate the back of the furniture. > Maximum safety. Nominal capacity of 65 kgs. per hanger. EN 15939 on A setting. The dowels have an additional feature. They have fixing holes for additional screwing. They only need to be used when applying extremely high loads. > Maximum simplicity. Fixing is done on the side of the cabinet. You just have to screw one 3.5 x 20 screw into the fixing hole. > Active safety version It is mounted like the standard TRASER-6 hanger and impedes any involuntary removal of top hanging cabinets. Depth adjustment Up to 18mm both at the front and back, in this case, without any need to drill the back of the furniture. Height adjustment Up to 18mm with a Phillips® No.2, Ø6 screwdriver or a Pozidriv® No.2, Ø6. Both adjustments through the same 18mm diameter hole. TRASER-6 > Rear drilling pattern TRASER-6 knock-in active safety version TRASER-6 Cabinet hanger, Knock-in fitting. With active security Standard Left Right > TRASER-6 active safety version > Disassembly See end of chapter Rear drilling pattern for active safety version. Two possibilities. > CH.5 HANGING SUPPORTS 229
RkJQdWJsaXNoZXIy MzYxMjYx