624.415.035 624.400.033 100 E=min 8 17 49 69 64,50 35 17 Ø25 Ø25 61,50 32 17 Ø25 Ø25 TRASER-6: Screw fitting Screw fitting TRASER-6 Depth adjustment Up to 18mm both at the front and back, in this case, without any need to drill the back of the furniture. Height adjustment Up to 18mm with a Phillips® No.2, Ø6 screwdriver or a Pozidriv® No.2, Ø6. Both adjustments through the same 18mm diameter hole. For those who prefer the traditional fixing system, we present the screw fitting system. The hanger can be fitted on both sides, left or right. > Maximum problem-free adjustment and precision. A Ø18mm hole provides access to all adjustments. Our adjustment screws never penetrate the back of the furniture. > Maximum safety. Nominal capacity of 65 kgs. per hanger. EN 15939 on A setting. > Maximum simplicity. Fixing is done on the side of the cabinet. You just have to screw three 3.5 x 20 screw into the fixing hole. > Active safety version It is mounted like the standard TRASER-6 hanger and impedes any involuntary removal of top hanging cabinets. TRASER-6 screw active safety version TRASER-6 Cabinet hanger, Screw fitting. With active security Standard > Rear drilling pattern > TRASER-6 active safety version > Disassembly See end of chapter Rear drilling pattern for active safety version. Two possibilities. > CH.5 HANGING SUPPORTS 230 CATALOGUE 2023
RkJQdWJsaXNoZXIy MzYxMjYx