L L JUNIOR-6 for inclined ceilings JUNIOR-6 for inclined ceilings 3 door cupboard, and 1 is inclined. Doors with a partially inclined cut: • If L > 260mm. the two upper rollers can be put on the cut door. • If L < 260mm. two intermediate rollers will have to be used. In the case where more than one door uses intermediate rollers, both doors can use the same intermediate rail, or each can use tracks at different heights, depending on the ceiling’s angle of inclination and the width of the doors. 4 door cupboard, and 2 are inclined. Overhang aligned with the groove of the profile and fixed with 2 screws. JUNIOR-6 Supported doors > CH.8 FITTINGS FOR SLIDING DOORS 507
RkJQdWJsaXNoZXIy MzYxMjYx