1 4 5 2 3 224 ≤ Ø27.5 265 ≤ Ø32 Technical data Assembly Lastly the assembly, insert the tray onto the plate-rack support. Proceed to fitting the plate-rack. Pressing the locking lugs, these will be retracted and easily fitted in the module drillings. Drill the 8 holes needed to fit the plate-rack onto the points marked out with the punch tool. Mark with a punch tool as indicated on the template. Various options are available, depending on the desired angle of the plate-rack. Carry out steps 1 and 2 on both sides of the unit. Place the template at the bottom and back of the unit. Quick and easy to assemble, a template of instructions is included on how it can be fitted. The plate-rack does not need screws and is automatically placed into the pre-drilled holes as you can see in the picture below. Drilling to be carried out in the module ø 10mm, depth 10mm. Technical data PLATE-RACK IN STAINLESS STEEL L (mm) Plate (mm) > CH.3 KITCHEN EQUIPMENT AND SUPPORT ELEMENTS 160 CATALOGUE 2023